Frequently Asked Questions

Returns are accepted within 14 days from the order delivery date. Returns are subject to restocking fees of 15% of the purchase price and return shipping fees.

Any trailers good for 10 feet to 12 feet small boats would work for JetAngler and KayakGT. Trailers for jet skies are okay but you need to move the winch stand forward to make it longer. Our kayaks are about 1 foot longer than typical personal watercrafts.

Our products can be used in shoals. Just make sure that the hull does not hit the stones. If the hull rubs against the stones, there will be scratches on the surface. For puncture, you can repair it like most Fiberglass hulls. Use commonly used resistant resin, fiberglass cloth and GELCOAT are okay.

17.5 hp four – stroke jet engine is located directly behind the operator and is easily accessible for maintenance. The engine runs on gasoline and is ethanol compliant. It is electric start with a 3.7 gallon fuel capacity giving you a 35 – 40 mile range. The engine is serviceable by most PWC, motorcycle, or small engine repair facilities.

Yes!

The transducer can be epoxied to the hull inside the engine compartment. Wires can be run through the bulkhead along with current wire routing to the center console. There is a spot for a universal kayak accessory mount on the top of the center console where the unit can be mounted. All external electronics need to run on their own power source, boat battery is strictly for engine cranking.

All external electronics should run off a secondary power source. There is plenty of space in the engine compartment to mount a battery tray.